6868N Console Access
I still can’t connect to the console on my Omniswitch 6868N, I’ve written the settings required for this access ( Baud rate 115200, Parity none, Data bits 8, stop bits 1).
The terminal opens but the background remains black and no login appears. I’ve tried another switch and other cables but still the same problem. With a Micro USB – RJ 45 Female adapter the problem is the same too.
Thank you for your help. JB
cf: the cable I use
Not sure on how exactly you try to connect but you may use a standard data micro-USB to USB cable and use the a Silab CP210 driver (https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers)
Same console settings are applicable (115200 baud rate).