BRIDGE info L2 Table full mac=xx.xx.xx.xx.xx.xx vlan=x

Topic

On a root switch of a site (6450-U24) the logfile is filled with these entries:
BRIDGE info L2 Table full mac=xx.xx.xx.xx.xx.xx vlan=x

Total mac addresses learned on the switch:
Mac Address Table Count:
Permanent Address Count = 0,
DeleteOnReset Address Count = 0,
DeleteOnTimeout Address Count = 0,
Dynamic Learned Address Count = 1938,
Static Multicast Address Count = 0,
Total MAC Address In Use = 1938

I found out that the mac adresses that are mentioned come from the uplinks of other switches.
Some of those mac addresses I can trace back to other switches, some are not found (due to inactivity I think)

This does not cause any problems, it is not an error.
They entries in the logfile are ‘info’ messages.

Should I clear the mac address table and reboot the switch to solve this?

Date
08.02.2022
answers
0
views
0
Author
Asked by jurg7209