Hello,

I need to create a multicast network. I have 2360 and 6865
This is my network :

Stream Server —-> 2360 <———> 6865 (Core) <———-> 2360 <——–Users

We have 6 vlans to declare on the core, each with an IP address for inter-vlan routing, but multicast must only be active on the Video vlan (vlan 30).

Here’s the configuration on the core:
! IPMS:
ip multicast admin-state enable
ip multicast querying enable
ip multicast querier-forwarding enable
ip multicast vlan 10 admin-state disable
ip multicast vlan 20 admin-state disable
ip multicast vlan 30 admin-state enable
ip multicast vlan 40 admin-state disable
ip multicast vlan 50 admin-state disable
ip multicast vlan 55 admin-state disable

On the switch where the server is connected:
! IPMS:
ip multicast admin-state enable
ip multicast querying enable
ip multicast querier-forwarding enable
ip multicast vlan 10 admin-state disable
ip multicast vlan 20 admin-state disable
ip multicast vlan 30 admin-state enable
ip multicast vlan 40 admin-state disable
ip multicast vlan 50 admin-state disable
ip multicast vlan 55 admin-state disable

On the switch where users are connected:
! IPMS:
ip multicast admin-state enable
ip multicast querier-forwarding enable
ip multicast vlan 10 admin-state disable
ip multicast vlan 20 admin-state disable
ip multicast vlan 30 admin-state enable
ip multicast vlan 40 admin-state disable
ip multicast vlan 50 admin-state disable
ip multicast vlan 55 admin-state disable

Despite this configuration, if I test with Iperf, the packets sent by the client are not received by the server.

I must have a problem somewhere…

Can you help me?

Thanks you