OS2360-U24X - 100/1000Base-X issue
I’m writing to this forum, because we ran into an issue with the OS2360-U24X and i want to check if anybody have the same issue as us. Also i’m looking for a solution if possible.
So the scenario is simple:
We have our OS2360-U24X and its ports are connected to industrial devices what only have 100base fixed SC connectors on them.
In the documentation of the switch it says it is capable of handling the 100/1000Base-X SFP. But in reality it is simply not working. With some bridged SFPs the ports just starts blinking as if there is a link on them but there is not even a patch cable. In the hardware description it only mentions the SFP ports are only 1G and there is no indication whatsoever regarding the 100/1000Base-X.
Can the switch manage the 100/1000Base or not?
Thank you for the help in advance
it should work if you connect 100Mbps SFP any of the 1-24. Ensure SFP is in ALE supported list.
try disabling the autoneg and see it helps. I have seen some display issues in the past having only SFP connected Led is up which was fixed as bug.
After disabling autoneg still does not work try to open a case with ALE support please.